Sony DAV-HDX277WC Operating Instructions Manual page 15

4
Connect the speaker cords to the speaker.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord
with the color tube to 3, and the speaker cord without the color tube to #.
Rear of the speaker
5
Attach the post to the base.
Insert the post so that the slit on the lower part of the post aligns with the projection of the base,
then secure the post with the two screws.
Projection
Note
• Make sure that the slot on the post aligns with the projection of the base by rotating the post slightly.
Color tube
Front speaker (L): White
Front speaker (R): Red
Post
Slit
,
Base
Screws
(small)
15
US