Sony DAV-FX10 Operating Instructions Manual page 66

By pressing Number
TV/VIDEO 0
1
2
3
4
5
6
7
8
9*
CLEAR*
ALBUM –*
ALBUM +*
* Except for North American models.
Operating for the THEATRE
SYNC function
Point the remote to the direction of TV and this
system, then press THEATRE SYNC once.
While transmitting the code from the remote, the
TV button flashes.
If this function does not work, change the
transmit time. The transmit time varies
depending on the TV.
To change the transmit time
Press and hold TV CH + while entering the
code for transmit time (see the table) using the
number buttons.
The transmit time from the remote is selected.
If you successfully set the transmit time code,
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes 5 times
quickly.
By pressing Number
TV CH + 1
2
3
4
66
US
TV's input source
No input source
(Default)
VIDEO1
VIDEO2
VIDEO3
VIDEO4
VIDEO5
VIDEO6
VIDEO7
VIDEO8
COMPONENT 1
INPUT
COMPONENT 2
INPUT
COMPONENT 3
INPUT
COMPONENT 4
INPUT
Transmit time
0.5 (Default)
1
1.5
2
By pressing Number
5
6
7
8
Note
• This function is only for SONY TVs. (This function
may not work on some SONY TVs.)
• If distance between TV and this system is too far, this
function may not work. Install the system near the
TV.
• Keep the remote pointed in the direction of the TV
and this system while the TV button is flashing.
Transmit time
2.5
3
3.5
4