Using The Theatre Sync Function - Sony DAV-FX10 Operating Instructions Manual

* To use these buttons, set the remote to the TV mode
by pressing the TV button. To cancel the TV mode,
press the TV button again.
You can select the TV channels by using the
number buttons.
To select the TV channels, press the number
buttons, then ENTER.
Note
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
• The TV mode turns off when you do not operate the
remote for 10 seconds.
Using the THEATRE SYNC
Function
THEATRE SYNC allows you to turn on your
SONY TV and this system, changes the system
mode to "DVD," and then switches the TV's
input source you set with one button push.
TV
TV CH +
ALBUM –/+
Number
buttons
CLEAR
With cover opened.
Preparing for the THEATRE
SYNC function
Register the TV's input source connected to this
system.
Press and hold TV/VIDEO while entering
the code for the TV's input source
connected to this system (see the table)
using the number buttons.
The TV's input source is selected.
If you successfully set the TV's input source
code, the TV button flashes twice slowly. If the
setting is unsuccessful, the TV button flashes 5
times quickly.
Set your TV's input to the input you used to
connect the system. For details, see the
instructions of your TV.
THEATRE
SYNC
TV/VIDEO
continued
65
US