Connecting System And Other Component - Sony DAV-FX10 Operating Instructions Manual

Step 4: Other Component Hookup
You can enjoy other component by connecting the VIDEO/AUDIO OUT jacks of another component.
Connecting the system and the other component
Outputs the other component through the system.
VCR
COAXIAL
DIGITAL
OUT
L
R
OPTICAL
DIGITAL
OUT
L
R
Digital satellite receiver or
PlayStation 2, etc.
To connect the VIDEO/AUDIO OUT jacks of other component to the
VIDEO 1 or VIDEO 2 (VIDEO/AUDIO IN) jacks of this system
Connect the VCR or other components to the VIDEO 1 or VIDEO 2 (VIDEO/AUDIO IN) jacks using
the video/audio cord (not supplied). When connecting a cord, be sure to match the color-coded sleeves
to the appropriate jacks on the components.
If you connect a digital satellite receiver with an DIGITAL OUT
(COAXIAL or OPTICAL) jack
The digital satellite receiver can be connected to the VIDEO 1 COAXIAL IN or VIDEO 2 OPTICAL
DIGITAL IN jack instead of the VIDEO 1 or VIDEO 2 AUDIO IN jacks of the system.
The system can accept both the digital and analogue signals. Digital signals have priority over analogue
signals. If the digital signal ceases, the analogue signal will be processed after 2 seconds.
VIDEO
OUT
AUDIO
OUT
FRONT R FRONT L SURR R SURR L CENTER WOOFER
SPEAKER
To VIDEO 2
(OPTICAL DIGAIL IN)
VIDEO
OUT
AUDIO
OUT
To VIDEO 1
(COAXIAL IN)
COAXIAL IN AUDIO IN
R L
VIDEO 1
OPTICAL
DIGITAL IN
R L
AUDIO IN
VIDEO 2
VIDEO 2
Yellow (Video)
White (L/audio)
Red (R/audio)
To VIDEO 1
(VIDEO/AUDIO IN)
VIDEO IN Y P /C P /C S VIDEO
B B R R
(DVD ONLY)
AM
COMPONENT VIDEO OUT
(DVD ONLY)
VIDEO
VIDEO IN
MONITOR OUT
COAXIAL
FM 75
To VIDEO 2
(VIDEO/AUDIO IN)
25
US