Step 8: Performing The Quick Setup - Sony DAV-DZ700FW Operating Instructions Manual

Note
• Use screws suitable for the material and strength of
the wall.
• Do not install the IR transmitter or IR receiver to a
wall of low strength.
• Sony is not liable for any damage or accident incurred
by incorrect installation (i.e. low strength wall, etc.),
incorrect use of this product, or natural disaster.
• When connecting/disconnecting cords, detach the IR
transmitter or IR receiver from the wall first.
Stand
Troughs
Step 8: Performing the
Quick Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
system.
To skip an adjustment, press >. To return to
the previous adjustment, press ..
CLEAR
X/x
ENTER
1
Turn on the TV.
2
Press [/1.
Note
• Disconnect the headphone when you perform
the Quick Setup. You cannot operate steps after
10 with the headphone connected.
• Make sure that the function is set to "DVD."
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ENTER] to run QUICK SETUP.]
appears at the bottom of the screen. If this
message does not appear, display the Quick
Setup and perform again (page 37).
Note
• When you press CLEAR in message, the
message disappears. When you need to perform
the Quick Setup, see "To recall the Quick Setup
display" (page 37).
4
Press ENTER without inserting a disc.
"/1
./>
continued
35
GB