Checking The Audio Signal Format - Sony DAV-DZ300 Operating Instructions Manual

• [2:STEREO]: the stereo sound of the
audio track 2
• [2:1/L]: the sound of the left channel of
the audio track 2 (monaural)
• [2:2/R]: the sound of the right channel of
the audio track 2 (monaural)
Note
• While playing a Super VCD on which the audio track
2 is not recorded, no sound will come out when you
select [2:STEREO], [2:1/L], or [2:2/R].
• You cannot change the sound for Super Audio CDs.
Checking the audio signal
format
(DVD, DivX video only)
If you press AUDIO repeatedly during
playback, the format of the current audio signal
(PCM, Dolby Digital, DTS, etc.) appears as
shown below.
x When playing a DVD VIDEO
Example:
Dolby Digital 5.1 ch
Surround (L/R)
1 : ENGLISH DOLBY DIGITAL
Front (L/R) +
Center
Example:
Dolby Digital 3 ch
Front (L/R)
2 : SPANISH DOLBY DIGITAL
56
GB
LFE (Low
Frequency Effect)
3 / 2 .1
L C R
LFE
LS RS
Currently playing
program format
Surround
(Monaural)
2 / 1
L R
S
Currently playing
program format
x When playing a DATA CD (DivX video) or
DATA DVD (DivX video)
Example:
MP3 audio
1:
MP3 128k
Bit rate
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below. Each
channel is output from a separate speaker.
• Front (L)
• Front (R)
• Center
• Surround (L)
• Surround (R)
• Surround (Monaural): This signal can be either
the Dolby Surround Sound processed signals
or the Dolby Digital sound's monaural
Surround audio signals.
• LFE (Low Frequency Effect) signal