Advertisement
IF NECESSARY
Step 7: Adjust the Projector Adapter Tension
The Projector Adapter (V) Tensioning Ring comes pre-tensioned from the factory. Should you find your installation
requires this ring to be adjusted and re-tensioned, follow this procedure, referring to Diagram I:
Step 7.1 Use the included Wrench (Z) to loosen the locking
nut.
Step 7.2 Rotate the large Plastic Tension Ring to achieve
the desired level of tension. Use the Wrench (Z) if
necessary.
7.1
Locking Nut
7
Step 7.3 Tighten the locking nut with Wrench (Z) to ensure
the Plastic Tension Ring cannot loosen.
Plastic Tension Ring
7.3
Z
7.2
Diagram I
Supporting your digital lifestyle
™
Advertisement
