Connectors, Leds, And Switch - Valon UPS6V-2 Operation Manual

6 Connectors, LEDs, and Switch


Charger input: Apply 6V dc to charge the battery and/or provide output power

Green LED: Indicates proper input voltage is applied for charging. Note charging voltage can be
lower than the required voltage for the certain 6V products.

Red LED: On when battery is charging, off when the battery is fully charged.

Push-button switch: Toggles the boost converter on and off.

Blue LED: With no charger input, the blue LED will be on if the boost converter is cycled on with
the push-button switch. With 6V input applied to the input connector, the blue LED will be on
regardless of the last state of the boost converter.
www.valontechnology.com
Figure 3 Connectors, LEDs, and push-button switch
8 5/13/2016