Connect Ip00 - liniLED PCB Photon Series Manual

Connect IP00
Remove tape protection from back. Peel off tape carefully from the
PCB and fold the first 5 mm.
Press connector firmly untill it clicks.
In order to maintain adequate electrical contact, the
connectors are designed for single use. Remove is possible
but will result in the destruction of the connector.
12 LED strip manual | liniLED® PCB Photon
5 mm
Make sure the PCB and connector are flat on the surface and insert
PCB into connector.
Finished product.
Use a flat screwdriver to open the connector.