Soldering - liniLED PCB Photon Series Manual

Solder
Work in an ESD protected environment. Make use of an anti-static
strap and use lead-free solder.
8 mm
Solder the wires to the PCB. We advise to use a cable with an area not
bigger then 0.5 mm2.
Pre-solder the wires.
11 LED strip manual | liniLED® PCB Photon
0.5 mm 2
350o C
Turn off the power. Make sure the wires are not under electric
current.
Pre-solder the connector pads.
Solder the wires to the connector pads.
350o C
350o C