Connecting Video Components - Sony 4-130-029-13(1) Operating Instructions Manual

Connecting video components

The following illustration shows how to
connect video components such as DVD
player, DVD recorder, VCR, etc.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
DVD recorder,
DVD player
Audio signal
B
L L
R R
AUDIO IN AUDIO IN AUDIO IN
AUTO
VIDEO 1 TV
CAL MIC SA-CD/CD
DC5V 700mA MAX
HDMI
BD IN
DMPORT
A
Audio signal
VCR
A Audio cord (not supplied)
B Coaxial digital cord (not supplied)
C Optical digital cord (not supplied)
20
GB
Satellite tuner,
Set-top box
Audio signal
C
TV
DIGITAL ANTENNA
COAX IN OPT IN OPT IN
VIDEO 2 SAT
DVD IN SAT IN
Notes
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
• Be sure to connect the video output of the DVD
player, DVD recorder and VCR to the TV, so that
the image is displayed on the TV. Refer to the
operating instructions of each connected
component for details.
• You cannot do recording on the DVD recorder or
VCR via this receiver. For details, refer to the
operating instructions supplied with the DVD
recorder or VCR.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
AM
OUT