Sony 3-285-995-11(1) Operating Instructions Manual page 29

Note
• When you use the TV (COAXIAL or OPTICAL
DIGITAL IN) jack (digital connection), the
digital connection takes priority.
2
Press SYSTEM MENU.
3
Press X/x repeatedly until "DEC.
MODE" appears in the front panel
display, then press
4
Press X/x repeatedly until the
decoding mode you want appears in
the front panel display.
When you want to output the TV sound or
stereo sound of a 2 channel source from the
six speakers, select the "PRO LOGIC,"
"PLII MOVIE," or "PLII MUSIC"
decoding mode.
For details, see page 30.
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
Note
• Depending on your TV, you may need to turn off your
TV's speaker to enjoy surround sound of the system.
Tip
• When listening to audio files using a portable audio
source, you can enhance the sound.
Press FUNCTION +/– to select "AUDIO." Connect
the portable audio source. Select "A.F.D. STD" for
"DEC. MODE."
To cancel, select other than "A.F.D. STD."
Changing the input level of the
sound from connected
components
Distortion may occur when you listen to a
component connected to the EURO AV T
OUTPUT (TO TV), LINE jacks on the rear
panel, or to the AUDIO IN jack on the front
panel. Distortion is not a malfunction and will
depend on the component connected.
To prevent distortion, reduce the input level on
the unit.
1
2
3
or c. 4
5
6
Press FUNCTION +/– repeatedly until
"TV," "LINE," or "AUDIO" appears in
the front panel display.
Press SYSTEM MENU.
Press X/x repeatedly until
"ATTENUATE" appears in the front
panel display, then press
Press X/x to select a setting.
• "ATT ON": You can attenuate the input
level. The output level is changed.
• "ATT OFF": Normal input level.
Press .
The setting is made.
Press SYSTEM MENU.
The system menu turns off.
or c.
29
GB