Specifications - Sony 3-283-375-11(2) Operating Instructions Manual

If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver's memory may remedy
the problem (page 27). However, note that all
memorized settings will be reset to their
factory settings and you will have to readjust
all settings on the receiver.
If the problem persist
Consult your nearest Sony dealer. Note that if
service personnel changes some parts during
repair, these parts may be retained.
Reference sections for clearing
the receiver's memory
To clear
All memorized settings
Customized sound fields

Specifications

Amplifier section
Power Output
Models of area code CEL, CEK, AU
Stereo mode (rated) (6 ohms, 1 kHz, THD 1%)
Surround mode (reference) (6 ohms, 1 kHz, THD
10%)
See 1)
Measured under the following conditions:
page 27
Area code
page 50 CEL, CEK
AU
2)
Reference power output for front, center and
surround speakers. Depending on the sound field
settings and the source, there may be no sound
output.
Inputs
Analog
Digital
Outputs (Analog)
AUDIO OUT
SUB WOOFER
Reproduction frequency range:
Tone
Gain levels
1)
90 W + 90 W
RMS output
FRONT:135 W
per channel
CENTER:135 W
SURROUND:135 W
per channel
Power requirements
230 V AC, 50 Hz
240 V AC, 50 Hz
Sensitivity: 800 mV/
50 kohms
Impedance: 75 ohms
(Coaxial)
Voltage: 800 mV/
10 kohms
Voltage: 2 V/1 kohm
28 – 20,000 Hz
±6 dB, 1 dB step
continued
2)
77 GB