Mazda CX-7 2007 Bodyshop Manual page 98

5. After temporarily installing new parts, make sure the related parts fit properly.
6. Install the rear pillar (outer).
Note
• When replacing the rear pillar (outer) and corner plate separately, weld the 5 locations indicated by (A).
End Of Sie
BM: TRUNK FLOOR PAN
09-80B–74
BODY STRUCTURE [PANEL REPLACEMENT]
CUT-AND JOIN
LOCATION
210mm
{8.27in}
10
REAR PILLAR
(OUTER)
(A)5
CORNER
PLATE
acxuub00000128