4.0 Operating Instructions
4.1
4.2
Control knob
i
Note
This instruction manual should be read carefully and retained
by the user. Particular attention must be made to the safety
information at the beginning of this manual.
Before Switching On
Ensure that the radiator has been installed correctly and that all warnings
and instructions have been read carefully and followed.
Switching On
When you are certain that you have completed the above, plug in and
switch on at the wall socket. Switch the radiator ON by turning the knob
clockwise. Check the supply light is illuminated ORANGE for a short while
then either GREEN or RED depending on the ambient temperature of the
room. This light can be seen on the control panel.
Warning
DO NOT switch off the radiator at the wall socket when the
radiator is warm.
Note
It is strongly recommended that radiators (all models) are run
for ½ hour each month during the summer to ensure that the
pump is fit for winter operation.
Supply Light
Page 8
Document
RADiWARM - Operator
Revision
0501M077.L
Date
19/06/2019