Setting The Time And Day; Factory Set Program; Frost Protection 4°C; Celsius Or Fahrenheit - Radiwarm 3100 Installation & Operating Instructions Manual

6.1

Setting the Time and Day.

6.2

Factory set Program.

Press ▲ and ▼ together from Setting the 7 day program to restore this
program.
6.3 Frost Protection 4°C.
6.4

Celsius or Fahrenheit

To set
HOLIDAY
together. The hours will start to
flash and you can adjust them
with ▲ and ▼.
Using SELECT you can adjust
minutes, day of week or
change from 24 hour clock to
12 hour clock. When finished
press OK.
On each weekday the target temperature
is 21°C from 6:30am to 8:30am, then 4°C
(frost protection) until 4:30pm, then it is
21°C until 11:00pm and finally 4°C until
PROG.1 the next day.
For frost protection set the Target
temperature to 4°C. There is no frost
protection if you set it to - - -.The
snowflake symbol appears if the actual
temperature ever falls below 4°C.
Pressing BOOST
together changes Actual and Target
temperature between
Fahrenheit.
Page 15
the clock press
and BOOST
and SET-BACK
Celsius and
Document
RADiWARM - Operator
Revision
0501M077.L
19/06/2019
Date