Table of Contents
Advertisement
Closing notes
1.
The device utilizes a magnetic field to determine the lock's state, which is why direct contact with magnets and
magnetized elements should be avoided. In some instances, upon contact with a strong source of magnetic field, the
device needs to be recalibrated.
2.
Low battery level will be announced with a modulated sound signal. For the device to work correctly, replace the
battery with a new one according to the manufacturer's recommendations.
3.
If the device is not working correctly, the configuration process has to be repeated, making sure to perform the
sequence carefully and to program the right moment for closing the lock (registering the lock's behavior at this moment
determines the threshold for detecting a change of state).
4. If the lock is only mounted on the outside, the settings for the inside have to be omitted, or the "None" option has
to be chosen in the menu.
5. If the key is used in a Master-Key system for two doors or two locks were used on one side of the door, the Door 2
settings have to be programmed as well. In some instances (if Door 1 and 2 are arranged in parallel to each other), a
magnetic identifier mounted by the lock has to be used.
6. Using the glue and waiting for it to set has to be performed in a well-ventilated room, and used components have to
be secured and stored away in a place designated for that purpose.
7.
The device registers the last state of the lock after using the key, whereas a movement outside of the lock to
replicate a movement inside the lock might be registered as a false state.
8. A movement inside the lock should take at least 1 second, and detecting the lock takes about 0.2 seconds (the key in
the lock's initial position).
9.
After about 10 seconds without any activity, the device goes into a standby mode and a movement is lasting for at
least 2 seconds is required for the device to follow the key's movement or to indicate the current state.
10.
Closing the lock fluently with the maximum number of turns increases the accuracy of detecting the lock's state
significantly.
9 |
S u r e K e y M a n u a l
Advertisement
Table of Contents
