Menu Relay Parameter; Relay Mode; Relay Function Static / Flash - Intec Controls PolyGard MGC2-04 User Manual

MGC2 – UserManual

4.5 Menu Relay Parameter

Reading and changes of the parameter for each single alarm relay.
Relay Parameter
R 01

4.5.1 Relay Mode

Definition of the relay mode – in activation status it is only overridden by the flashing function:
Symbol
R 01
De-energized

4.5.2 Relay Function Static / Flash

Definition of the relay function – acts directly on the relay output:
Symbol
R 01
0
12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | relevantsolutions.com/inteccontrols
Specifications subject to change without notice. | USA 160811 | Page 12 of 34
(Main menu)
(Selection relay No. – only registered modules possible)
Relay mode
Relay Mode
De-energized
See 4.5.1
Relay function
Static / Flash
0 s
See 4.5.2
Activation of latching mode
Latching Mode
No
See 4.5.3
Definition horn function
Time Recurr. DI
0 s 0 0
See 4.5.4
Definition external operation
External Mode
DI: ON = 0: OFF = 0
See 4.5.5
Delay time for relay ON
ON-Delay Time
0 s
See 4.5.6
Delay time for relay OFF
OFF-Delay Time
0 s
See 4.5.6
Description Setting Status
Relay No.
Relay Mode De-energized
Description Setting Status
Relay No.
Function 0
Function
Selection relay
De-energized = Alarm OFF = Relay OFF Energized
= Alarm ON = Relay OFF
Function
Selection relay
0 = Relay function static
> 0 = Relay function flashing (= time interval in sec.)
Impulse / Break = 1:1
PolyGard is a registered trademark of MSR-Electronic GmbH
®