Changing Parameters - Honeywell Krom Schroeder BCU 480 Manual

Project planning information

6 .24 Changing parameters

In certain cases, it may be necessary to change the
default settings. Using a separate software package
and a PC opto-adapter, it is possible to modify certain
parameters on the BCU, such as the switch-off thresh-
old of the flame amplifier, the behaviour in the event
of a flame failure or whether the pilot burner is to burn
permanently in the case of pilot and main burner moni-
toring.
The software package with PC opto-adapter, as well as
"Changed parameters" stickers, are available as acces-
sories, see page 71 (Accessories).
The unit parameters set at the factory are specified in
the enclosed delivery note.
Document changed parameters in BCSoft using the
protocol function and enclose the protocol with the
plant documentation.
If a replacement is ordered for a BCU with changed pa-
rameters, refer to the protocol for details.
BCU 480 · Edition 03.16l 68