Advertisement
Voltage / Frequency
Power
Overheating Protecting
Cord Length
Unit Weight
Filters (Optional)
A set of Filters is available for the Inflatable Blower models which will help prevent small debris and
dust from entering the unit. To clean the filters: Remove the filters from the unit and wash with warm
soapy water, rinse with clean water and let dry thoroughly before reinstalling.
Installation:
Filters snaps into the air inlets.
Note:
The filter I is for Motor Side,
The filter II is for Fan Side
115V / 60Hz
1 HP
Rated Airflow (on high)
Thermally
20 ft
26.1 Lbs
Filter Removal:
Pull the filters off the unit.
Note:
After cleaning make sure the
filters are dry before
reinstalling.
Amps
Speeds
Housing
Unit Size
17.5" x 21" x 18.5"
8
3600
one
PP
Advertisement
