Table of Contents
Advertisement
3.
Press Menu. Choose Add, Select.
4.
On the contact names listed, choose the one you want to make a voice dial.
5.
After choosing a contact, press again center button of
A statement "Please Record Your Voice!" appears. Press Ok.
6.
Follow the instructions on screen. Voice is then saved on the phone. Under Voice Dial
list, the name which already has a voice command appears.
7.
Continue pressing
Note: Noisy environment may affect voice recognition. Record your voice in a quiet
environment.
a.
ACTIVATING THE BLUETOOTH
You must activate your Bluetooth to establish a Bluetooth connection between your Pocket
PC Phone and other Bluetooth devices.
1.
Tap
. Scroll down to Settings. Tap Connections tab. Tap Bluetooth.
2.
Select On and tap ok.
V
3.
Tap
to exit.
b.
PAIRING TO THE CELLULAR PHONE
1.
Bring your PC phone at about 20 cm from the Car Kit.
2.
From the ON state, press the multi-function button for 10 seconds or until a distinctive
three-tone sound will be heard and at the same time, the Bluetooth indicator LED
changes from blinking blue to alternate blinking of red and blue. This indicates that the
unit is now ready for pairing.
3.
Press the multi-function button once again for a short time, to access headset
pairing mode.
4.
Tap
. Scroll down to Settings. Tap Connections tab. Tap Bluetooth.
5.
Tap Bonded Devices tab. Tap New.
Your device now searches for Bluetooth devices and displays them in the list.
6.
Tap the name of the device that you want to bond with your PC phone, and then tap
Next.
7.
Enter "0000" as the Device PIN and then tap Next.
8.
Tap Finish. (Note: In Name, you may or may not edit the name of your bonded device).
9.
For the question, "This Bluetooth device supports headset profile, would you like to set it
as your Blue tooth headset?", tap Yes tab.
10.
Tap ok, and then
The unit is now ready to link calls from the PC phone directly to the Car Kit. An icon appears
during the standby mode indicating that the Car Kit is linked with the PC phone. If pairing is
unsuccessful, the steps above may be repeated.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard on the phone and
on the Car Kit.
1.
When answering is done on the Car Kit (that is, pressing the multi-function button once),
the ongoing call can be heard from it.
2.
When answering is done on the phone, ongoing call can be heard from the phone (not
on the Car Kit). But if you wish to hear and transfer the call to the Car Kit, just press
once on the Car Kit's multi-function button.
3.
To terminate the call, press down the multi-function button once.
to exit.
USING WITH Qtek 2020
V
to exit.
39
key. Choose Recall, Select.
Advertisement
Table of Contents
