ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar tones will be heard on the Car Kit.
When answering is done on the Car Kit, (that is, pressing the multi-function button
once), the ongoing call can be heard from it.
When answering is done on the phone, ongoing call can still be heard on the Car Kit.
To terminate the call, press the multi-function button once.
MAKING A CALL with the Car Kit on
Using your phone, enter the contact number and press Send key. Audio will be heard
on the Car Kit. Note: If at times, when audio is heard on the phone, just press once on
the multi-function button to transfer audio to the Car Kit.
To terminate the call, press down the multi-function button once.
Press the multi-function button twice quickly to redial the last number.
Audio Transfer can be done by pressing down the multi-function button once or accessing the
cell phone's menu during ongoing calls.
REJECTING A CALL
Press the multi-function button twice quickly to reject an incoming call.
ACTIVATING THE BLUETOOTH
You must activate your Bluetooth to establish a Bluetooth connection between your mobile
phone and other Bluetooth devices.
Press Menu button. Scroll to Setup, SELECT. Choose Connectivity, SELECT.
Scroll to Bluetooth, Change. The phone is now connecting with the Bluetooth device.
An icon will appear on the upper left corner when connected. OPTIONS button may also
be pressed. Choose Activate BT, then SELECT.
Continue pressing the On/Off/End Key to exit from Menu.
Press Menu followed by the sequence of numbers below. Doing this sequence once will either
activate or deactivate the Bluetooth depending on your current setting.
PAIRING TO THE CELLULAR PHONE
Bring the cellular phone at about 20 cm from the Car Kit.
From the ON state, press the multi-function button for 10 seconds or until a distinctive
three-tone sound will be heard and the same time, the Bluetooth indicator LED changes
from blinking blue to alternate blinking of red and blue. This indicates that the unit is
now ready for pairing.
Press Menu button. Scroll to Setup, SELECT. Choose Connectivity, SELECT. Scroll to
Bluetooth, OPTIONS. Scroll to Search for..., press ACCESS button. The phone is now
searching for devices. When the search is complete, Devices disc. is displayed as title.
If the device you are looking for is not on the list, repeat the procedure by pressing the
OPTIONS and REPEAT buttons. Then press SELECT to add the device. The phone
will initiate connection with the Car Kit.
USING WITH SIEMENS S55