Table of Contents
Advertisement
h.
RECORDING FOR VOICE DIALING
Note: Voice dialing entries must be stored in the phone's memory (not on the SIM
card!).
1.
Press
control, Select. Voice dialing, Select.
(Contacts list will appear).
2.
Choose among the contacts whichever you want to have a voice name/voice tag. When
it's highlighted, press Select.
3.
Follow the instructions that will be displayed on screen.
Note: You may use any word(s) or just say the person's name for a voice tag.
4.
When your spoken word(s) is caught up by the phone, it will ask you to listen to your
recording and will ask the question, "Is it ok?".
5.
As soon as you press Yes as reply, your voice command will be saved. Under Voice
Commands tab, a callout icon
command.
6.
Continue pressing
Note: Noisy environment may affect voice recognition. Record a voice and make a voice dial
in a quiet environment.
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your mobile phone to establish a Bluetooth
connection between your mobile phone and other Bluetooth devices.
1.
Press
or
2.
Scroll to Settings, SELECT.
SELECT.
Set-up, SELECT. Scroll to Power: Off. Press CHANGE. Choose On, SELECT.
3.
Continue pressing BACK to exit.
b.
PAIRING TO THE CELLULAR PHONE
1.
Bring the cellular phone at about 20 cm from the Car Kit.
2.
From the ON state, press the multi-function button for 10 seconds or until a distinctive
three-tone sound will be heard and at the same time, the Bluetooth indicator LED
changes from blinking blue to alternate blinking of red and blue. This indicates that the
unit is now ready for pairing.
3.
Press
or
SELECT. Bluetooth Link, SELECT.
4.
Choose Handsfree, SELECT. [Look for devices], SELECT. The phone will then scan
devices until it displays them in the list.
5.
Under scan results, choose the device you want to pair with your mobile phone and
press SELECT. A question "Bond With (device name)?" appears. Press YES.
6.
Enter Bluetooth Passkey "0000" then press ok. If pairing is successful, a remark
"Connected..." appears. The phone exits automatically.
The Car kit is now linked or paired with the phone. If pairing is unsuccessful, the steps
above may be repeated.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, ring tone will be heard on the phone and on the Car Kit.
1.
Shortly press the multi-function button once to answer the call.
2.
To terminate the call, do the same; shortly press the multi-function button once.
to access Main Menu. Scroll to Settings and press Select. Choose Voice
to exit.
USING WITH MOTOROLA E398
to access Main Menu.
to access Menu. Scroll to Settings, SELECT. Choose Connection,
Edit names, Select. New voice, Add.
will appear next to a contact name which has a voice
Scroll to Connection, SELECT.
19
Bluetooth Link,
Advertisement
Table of Contents
