Network Stack Configuration - C&T Solution RCO-3200 Series User Manual

Chapter 4: BIOS Setup

4.3.7 Network Stack Configuration

■ Network Stack
This item allows you to enable or disable UEFI network stack.
⚫ IPv4 PXE Support
This item allows you to enable or disable IPv4 PXE Support. t. This item is configurable only
when Network Stack is enabled.
⚫ IPv4 HTTP Support
This item allows you to enable or disable HTTP boot support for IPv4. This item is
configurable only when Network Stack is enabled.
⚫ Ipv6 PXE Support
This item allows you to enable or disable IPv6 PXE Support. t. This item is configurable only
when Network Stack is enabled.
⚫ IPv6 HTTP Support
This item allows you to enable or disable HTTP boot support for IPv4. This item is
configurable only when Network Stack is enabled.
⚫ PXE boot wait time
This item allows you to configure how long to wait before you can press to abort the PXE
boot. This item is configurable only when Network Stack is enabled.
⚫ Media detect count
This item allows you to set the number of times to check the presence of media. This item is
configurable only when Network Stack is enabled.
RCO-3200 | User's Manual
84