Set Torque Force To 3.5 Kgf-Cm To Execute All The Screwing And Unscrewing; Removing Chassis Bottom Cover - C&T Solution RCO-3200 Series User Manual

Chapter 3: System Setup
3.1 Set torque force to 3.5 kgf-cm to execute all the screwing and
unscrewing.

3.2 Removing chassis bottom cover

1. Turn the system upside down. Unscrew the six screws (M3x5L) on the bottom cover.
2. Now you can remove the bottom cover.
In order to prevent electric shock or system damage, before removing the
chassis cover, must turn off power and disconnect the unit from power source.
RCO-3200 | User's Manual
57