Advertisement
Sending an Event
Please transmit events as soon after each recording as possible:
•
Call 888.500.3522. For the best quality, transmit recordings from a
land line phone and follow the directions of the technician.
•
Set the monitor on a flat surface with the speaker hole up and place
the telephone mouthpiece over the monitor speaker hole.
•
Push the SEND button for two seconds, until an audible sound is
heard. The monitor will make sounds while the recording is being sent.
•
A falling tone will sound when the transmission is complete.
Erasing an Event
•
Press and hold the RECORD and SEND buttons at the same time for two seconds. Any previously
recorded events will be erased. (Will be followed by a single beep and rising tones.)
•
The monitor is ready to record again.
Monitor
4
Advertisement
