Taking Out Of Operation - Kranzle Colly 800 Operating Manual With Spare Parts List

Taking out of operation

Checking the sweeping rollers
space-saving storage
14
Always check if any thread, wires or ribbons
have wound around the sweeping roller
after use. They must be removed in order to
ensure smooth movement, as well as proper
operation of the sweeping roller.
It can be stowed away space-savingly in
just a few steps to protect the bristles:
Simply empty the container with the swept
material, fold over the push bar and place
the Kränzle Colly 800 vertically.
Small repairs - do it yourself
Cleaning/replacing the filters
Replacing the side brushes
1. You can easily remove the two PPI 45
filters (left and right). For this, pull the
lower tab up and pull the filters out
of the hand power sweeper with their
filter housing.
2. The filters can be removed from the
filter housing and cleaned with com-
pressed air. Replace the filters only
with Kränzle genuine spare parts.
1. Fold up the side brush arms and loosen
the three screws with a suitable screw-
driver (PZ2). Replace the worn side brush
with a new one and attach it again with
the screws. Use only genuine Kränzle
spare parts.
15