Safety Notes; General Rules - Kranzle Colly 800 Operating Manual With Spare Parts List

General rules

Intended Use
The hand power sweeper Colly 800 is only built for the common application of
sweeping indoor and outdoor areas such as production sites, storage halls, par-
king places, and pedestrian passages, and to collect dry material.
Any other use above and beyond is considered as improper use. The manufacturer
shall not be responsible for any damages resulting from any such improper use.
Intended use shall also include compliance with manufacturer specified mainte-
nance intervals (refer to maintenance).
The power sweeper Colly 800 is intended for use on flat surfaces.
With the side brushes adjusted to the local situation, you can easily move the
sweeper across the surface to be cleaned. This should be done at normal walking
speed (approx. 2.5 km/h). The sweeping performance depends on the speed at
which the hand power sweeper is pushed.
The machine must not be used to remove hazardous dusts (refer to

safety notes).

Disposal of the old device
Please dispose of devices via suitable collection systems at the end of their service
lives. The devices contain valuable recyclable materials that should be reused.
8
Mounting
1. The side brushes must be installed
after unpacking. Take the hand power
sweeper from its packaging. First fold
up the push bar and then the two side
brush arms.
The side brush arms can be folded up
individually as well if necessary.
2. The packaging includes a separate box.
It contains the two side brushes and 6
Phillips screws.
Attach a side brush to each side brush
arm with three Phillips screws each.
Use a suitable screwdriver (PZ2) for
this.
9