Functional Details / Putting Into Operation - Kranzle Colly 800 Operating Manual With Spare Parts List

Functional details / Putting into operation

Setting the push bar
Setting the side brushes
10
1. First fold the push bar up.
2. The push bar can be set to the desired
working height. This is easier on your
back.
1. The hand wheel at the side brush arm
sets the optional pressure against the
ground for each side brush. It must be
adjusted to the local situations until
a good sweeping result is achieved.
2. The side brushes are pre-set to 7.5 mm
in the factory.
Functional details / Putting into operation
If the pressure of the side brush is set too high, pushing requires a
greater strength and the bristles of the side brush wear more quickly.
The best sweeping result is achieved at 2.5 km/h. This is the normal
walking speed of a pedestrian.
Dustpan principle
The Colly 800 works with a sweeping roller and two side brushes. When moving
forward, the sweeping roller and the side brushes are powered. The smoothly
moving Kränzle Colly 800 takes up, e.g., dust, cigarette stubs, leaves, smaller
plastic and metal parts, in its large waste bin securely thanks to its double
bristle sets (alternating hard and soft bristles).
2. Turning the hand wheel clockwise lifts
the side brush and reduces pressure on
the ground.
3. Turning the hand wheel counterclock-
wise lowers the side brush and increases
pressure on the floor.
1. The two side brushes turn inwards while
moving and send the swept-up material
to the sweeping roller. A caster makes
the Kränzle Colly 800 easily steerable,
always keeps it at an even distance from
the ground and ensures a completely
even sweeping effect this way.
11