Zte Blade L130 User Manual page 28

Set Access Point Names
To connect to the Internet, you can use the default Access
Point Names (APN). And if you want to add a new APN,
please contact the service provider to get the necessary
information.
1. From the home screen touch Settings > Network &
Internet > Mobile network.
2. If two nano-SIM cards are installed, touch one of the card
names at the top.
3. Touch Advanced > Access point names.
4. Touch > New APN and touch each item to enter the
information you get from your service provider.
5. Touch > Save to complete.
NOTE:
To set the APN to default settings, on the APNs screen
touch > Reset to default > OK.
Turn on/off Mobile Data
1. From the home screen touch Settings > Network &
Internet > Data usage / SIM cards.
2. Switch on/off Mobile data.
28