References/Safety - HDT 8001 Instruction Manual

Scope of Supply/References/Safety
The HDT EMF tester is supplied with battery and instruction manual. After unpacking,
verify that instrument and accessories are complete and in good conditions.
Scope of Supply:
1 pc. HDT EMF tester
4 pc. Batteries IEC LR03 / AAA
1 pc. Instruction Manual
Important advice marked on the instrument or in the instruction manual.
Attention! Warns of potential danger, observe the advice given in the instruction
manual.
Conformity symbol, indicates that the instrument complies with EMC Directive
(89/336/EEC). Standards EN 50081-1 and EN 50082-1 are respected.
2.0 Safety
The HDT EMF tester has been manufactured and tested in compliance with the valid
safety regulations and left our factory in technically safe and perfect condition. To
maintain this conditions, the user must observe the safety instructions contained in this
instruction manual.
This instruction manual contains informations and advice that is essential for safe
operation and use of the instrument.
Before study the instruction manual carefully, and follow it in all details. Failure to follow
the instructions, or neglecting warnings can lead to serious injury, and damage to the
instrument.
Protect the instrument from exposure to direct sunlight to ensure perfect function and a
long life cycle.
18