1. Manuals
  2. Brands
  3. Superrollo Manuals
  4. Indoor Furnishing
  5. GW250
  6. Translation of the original operating and assembly manual

Superrollo GW250 Translation Of The Original Operating And Assembly Manual

Electronic roller shutter belt winder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Electronic Roller Shutter Belt Winder superrollo GW250 / GW255
EN
Translation of the Original Operating and Assembly Manual
BA10250-2 (02.16)
Item No.:
superrollo GW250 *
superrollo GW255 **
*
for standard belts (23 mm)
** for large belt boxes
SR10250
SR10255

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GW250 and is the answer not in the manual?

Questions and answers

Related Manuals for Superrollo GW250

Summary of Contents for Superrollo GW250

  • Page 1 Electronic Roller Shutter Belt Winder superrollo GW250 / GW255 Translation of the Original Operating and Assembly Manual Item No.: superrollo GW250 * SR10250 superrollo GW255 ** SR10255 for standard belts (23 mm) ** for large belt boxes BA10250-2 (02.16)

  • Page 2: Dear Customer

    Dear Customer, With your purchase of a roller shutter belt winder superrollo GW250 / GW255, you have chosen a quality product manufactured by superrollo. Thank you for the trust you have placed in us.

  • Page 3: Table Of Contents

    Technical Term - Definition ..........6 in the main menu ............36 Included in delivery .............7 15.1 Switching automatic mode on/off ........37 Overview of the superrollo GW250 / GW255 ...8 15.2 Setting the switching times Operating buttons ..............9 (opening and closing times) ..........38 The display and its symbols ..........10...

  • Page 4: These Instructions

    1.1 Application of this manual ◆ Before you begin, please read this manual through ◆ When passing the superrollo GW250 / GW255 on to a third completely and follow all the safety instructions. party, this manual must be passed on as well.

  • Page 5: Levels Of Danger And Signal Words

    2.1 Levels of danger and signal words CAUTION! DANGER! This hazard may result in minor or moderate injury This hazard will result in serious injury or death if not avoided. if not avoided. WARNING! ATTENTION! This hazard may result in serious injury or death This hazard may lead to property damage.

  • Page 6: Technical Term - Definition

    Running Time Limit - Transient Operation (KB) must fulfil. It also contains significant hazards with regard to the design, transportation, installation, ◆ The roller shutter belt winder superrollo GW250 / operation and maintenance of these shutters and GW255 is not designed for continuous operation.

  • Page 7: Included In Delivery

    1 x Connecting cable with Euro plug 1 x Reel compartment cover 1 x Cover plate 1 x Traction relief mechanism incl. assembly screws for superrollo GW250 1 x Traction relief mechanism incl. assembly screws for superrollo GW255 1 x Instruction manual (not illustrated) After unpacking please check and compare...

  • Page 8: Overview Of The Superrollo Gw250 / Gw255

    4. Overview of the superrollo GW250 / GW255 Front cover Fastening holes Reel compartment Deflection roller cover Belt inlet Type plate Up button Display Down button Reel Plus button Fastening hooks OK button Menu button Traction relief Minus button Disengaging...

  • Page 9: Operating Buttons

    4.1 Operating buttons Pos. Symbol Description Up / Stop button ◆ The roller shutter travels upwards ◆ The roller shutter stops Down / Stop button ◆ The roller shutter travels downwards ◆ The roller shutter stops Menu button ◆ Call up the main menu ◆...

  • Page 10: The Display And Its Symbols

    4.2 The display and its symbols Pos. Symbol Description Time / setting parameters Switching automatic mode on/off Direction of travel - up / down Switching times (opening / closing time) Automatic dusk function Automatic solar function Setting the end points Setting the time / date Setting the weekend switching times...

  • Page 11: The Standard Display And The Main Menu

    4.3 The standard display and the main menu The standard display (see example) The main menu Displays the time, no Enables display and automatic functions selection of the individual are active. functions and menus. Displays the time The selected menu and the activated flashes, e.g.

  • Page 12: Functional Description

    5. Functional description Features and The superrollo GW250 / GW255 is an electric roller control options: shutter belt winder designed for use inside. The unit is installed as a flush-mounted device. ◆ Operational demonstrator The power supply is provided via the enclosed ◆...

  • Page 13: Description Of The Safety Functions

    DOWN ( t ) direction, the belt will stop moving and the superrollo GW250 / GW255 If the drive jams in the UP ( ▲ ) direction (for example, due is switched off.

  • Page 14: Conduct In The Event Of Power Failure

    5.2 Conduct in the event of power failure Data retention following a power failure After a power failure the time flashes in the display and the installation wizard is active. All settings are permanently saved. The configured switching times are retained even following extended power failure.

  • Page 15: Technical Specifications

    Mechanical capacity - Automatic dusk 2 to 50 Lux control Nominal torque: Mains connecting cable: 2 x 0.75 mm (H03VVH2-F) - superrollo GW250 10 Nm Permissible ambient tem- 0 °C to +40°C - superrollo GW255 14 Nm perature: Maximum speed: Sound pressure level (LpA): ≤...

  • Page 16: Dimensions

    6.1 Dimensions 1 3 9 1 9 6 All dimensions in mm All dimensions in mm superrollo GW250 superrollo GW255 Item no.: SR10250 Item no.: SR10255...

  • Page 17: Permissible Roller Shutter Belts

    6.2 Permissible roller shutter belts ATTENTION! The specifications are intended for guidance only and apply to an ideal installation The superrollo GW250 / GW255 may be damaged situation. if excessively long belts are used. The actual values may vary due to Only use belts of the permissible lengths.

  • Page 18: Safety Instructions

    ◆ Never use defective or damaged equipment. ◆ Carry out all cleaning work on the roller shutters ◆ Check the superrollo GW250 / GW255 and the whilst the device is disconnected from the mains provided mains cable beforehand for damage.

  • Page 19: Intended Use

    0.15 m/s. approx. one hour. 7.1 Intended use Only use the superrollo GW250 / GW255 for opening and Only use the manufacturer's original spare parts. closing flat roller shutters with a permissible belt. ◆ By doing so, you avoid risk of malfunctions and damage to your superrollo GW250 / GW255.

  • Page 20: Improper Use

    GW250 / GW255 must be flat. 7.2 Improper use Using the superrollo GW250 / GW255 for purposes other There is a risk to life caused through short circuiting than previously mentioned is impermissible. and electric shocks if the superrollo GW250 / GW255 is used outside.

  • Page 21: Safety Instructions For The Installation

    8. Safety instructions for the installation Poor routing of the belt can cause the belt to fail Incorrect installation can lead to property damage. and leads to unnecessary loads on the superrollo ◆ Strong forces are exerted during operation of the GW250 / GW255.

  • Page 22: Preparation For Installation

    8.2 Preparation for installation Take measurements. Check that the belt box has suf- ficient space to house the superrollo GW250 / GW255. Remove the old belt winder, if you are carrying out a conversion to an existing roller shutter system.
  • Page 23 8.2 Preparation for installation Prepare the belt. Cut the belt off approx. 20 cm under the belt box. Fold the end of the belt over by approx. 2 cm and cut a short slit in the centre. This enables you to subsequently hook the belt onto the reel.

  • Page 24: Safety Instructions For The Electrical Connection

    ◆ Disconnect all phases of the mains power supply cable and secure it to prevent any reconnection. ◆ Check that the system is de-energised. 9.1 Connecting the connecting cable to the superrollo GW250 / GW255 Connect the provided connecting cable to the connecting terminals of the superrollo GW250 / GW255.
  • Page 25 9.1 Connecting the connecting cable to the superrollo GW250 / GW255 WARNING! A damaged connecting cable may cause a short circuit. ◆ Ensure that the connecting cable is laid safely. ◆ The connecting cable muse not be pinched or damaged when screwing on the superrollo GW250 / GW255.

  • Page 26: Drawing In And Fastening The Belt

    10. Drawing in and fastening the belt Insert the mains plug into the socket. CAUTION! There is a risk of injury from the reel. Never reach into the reel compartment when the motor is running. Press the Up button until the fastening hooks are easily accessible in the reel compartment.
  • Page 27 10. Drawing in and fastening the belt Next, draw-in the belt into the superrollo Belt path GW250 / GW255 from the top. in the device Feed the belt into the device, as shown in the image, and slide it over the fastening hooks from above.

  • Page 28: Mounting The Superrollo Gw250 / Gw255

    Mount the superrollo GW250 / GW255 as straight as possible, so that the belt can wind correctly. Ensure that the superrollo GW250 / GW255 sits freely in the belt box and that it isn't in contact with the masonry, otherwise noise will be generated during operation.
  • Page 29 11. Mounting the superrollo GW250 / GW255 Mount the light sensor (not included, see page 58, Accessories). ◆ Insert the light sensor plug into the designated connection socket on the bottom of the superrollo GW250 / GW255. ◆ Subsequently secure the light sensor to the window pane using the suction cup.

  • Page 30: Introduction To Opening And Setting The Functions

    12. Introduction to opening and setting the functions Open the main menu. Select the desired setting (e.g. On). Pressing the menu button in the standard display causes the main menu to open. By confirming the setting you will return Select the desired menu. to the main menu.

  • Page 31: Initial Commissioning With The Help Of The Installation Wizard

    The automatic functions remain blocked until the end point setting is configured. Readiness for operation The superrollo GW250 / GW255 is ready for use as soon as the installation wizard has finished. In the main menu you can change your settings...
  • Page 32 13. Initial commissioning with the help of the installation wizard The installation wizard appears as soon Set the current date (day. month) and as the plug is plugged into the socket. confirm each entry. All icons and digits in the display will flash. Set the current year and confirm the entry.
  • Page 33 Set the upper end point. ATTENTION! Setting the wrong upper end point may lead to overload or damage the superrollo GW250 / GW255 or the drive. ◆ Do not set the upper end point right up to the limit Press and hold the Up button.
  • Page 34 Set the lower end point. as the final setting is confirmed. Press and hold the Down button. The superrollo GW250 / GW255 is now The roller shutter travels down. ready for operation. Release the Down button, as soon as the roller shutter reaches the desired position for the lower end point.

  • Page 35: Manual Operation

    14. Manual operation Manual operation is possible in any of the modes and has priority over the programmed automatic functions. Open the roller shutters. By briefly pressing the button, the roller shutters will move to the upper end point. Stop the shutters in the interim. Close the roller shutters.

  • Page 36: Description Of The Functions And Setting Options In The Main Menu

    Switching times (opening / closing time) Automatic dusk function (with light sensor) In the main menu, you can call up and set all of the functions for the superrollo Automatic solar function (with light sensor) GW250 / GW255. End point setting Manual operation is not possi- ble from the main menu.

  • Page 37: Switching Automatic Mode On/Off

    15.1 Switching automatic mode on/off Automatic mode [ On ] Open the main menu. ◆ All previously entered automatic mode functions Select automatic mode and open are active. the menu. ◆ Manual operation is also possible in automatic mode. Automatic mode [ OFF ] ◆...

  • Page 38: Setting The Switching Times (Opening And Closing Times)

    Deactivating the switching times [ OFF ] You can configure four different opening and closing times for the superrollo GW250 / GW255 in order to open Each switching time can be deactivated individually. or close your roller shutters at your preferred times.
  • Page 39 15.2 Setting the switching times (opening and closing times) Set the opening time [ ▲  ] for Monday to Friday: Set the opening [ ▲  ] and closing time [ t  ] for Saturday and Sunday: Set the desired opening time Select the desired switching times (hours: minutes) and confirm each entry.

  • Page 40: Setting The Automatic Dusk Function

    15.3 Setting the automatic dusk function The automatic dusk function causes the roller shutters Open the main menu. to close to the lower end point automatically. Select the automatic dusk function and Automatic dusk function with connected light open the menu. sensor At twilight, the roller shutters will lower to the lower end...
  • Page 41 15.3 Setting the automatic dusk function Setting the twilight limit: Set the desired limit. ACTUAL value Currently measured brightness (e.g. 10). "- -" = too bright SET value Configurable set limit 01 = very dark, approx. 2 Lux 15 = less dark, approx. 50 Lux If the set limit value is not met due to the on- set of twilight, the roller shutters will close.

  • Page 42: Setting The Automatic Solar Function

    To do this, the light sensor is secured to the window pane with a suction cup and then plugged into the superrollo GW250 / GW255. Automatic solar function Automatic moving up and down of the roller shutter once a set limit is exceeded.
  • Page 43 15.4 Setting the automatic solar function Automatic lowering If the sensor detects uninterrupted sunlight for 10 mins 10 minutes, the shutter will descend until its shadow covers the light sensor. Automatic clearing After approx. 20 minutes, the roller shutter is automatically raised a small amount to uncover the After 20 sensor.
  • Page 44 15.4 Setting the automatic solar function Setting the solar limit value: Open the main menu. Set the desired limit. Select the automatic solar function and open the menu. ACTUAL value Currently measured brightness (e.g. 37). Switch the automatic solar function on and confirm the entry.

  • Page 45: Setting The End Points

    15.5 Setting the end points Setting order Move the roller shutters to the centre position first. Set the upper end point, see page 33. Set the lower end point, see page 34. Open the main menu. Select the end point and open the menu.

  • Page 46: Set Time And Date

    15.6 Set time and date Set the year, see page 32. Open the main menu. Select the time and date and open the menu. Setting order Set the time (hours: minutes), see page 32. Set the date (day. month), see page 32.

  • Page 47: Erase All Settings, Software Reset

    16. Erase all settings, software reset If necessary, you can erase all of your settings and return This displays the software version for the the superrollo GW250 / GW255 system to its original superrollo GW250 / GW255. factory settings. Example Remove the cover plate from the lower assembly screws and setting buttons.

  • Page 48: Removing The Superrollo Gw250 / Gw255

    17. Removing the superrollo GW250 / GW255 (e.g. in the event of a move) Remove the cover plate from the lower assembly screws and setting buttons. Erase all settings. Simultaneously press and hold the buttons for 4 seconds. Fully close the roller shutters.
  • Page 49 17. Removing the superrollo GW250 / GW255 (e.g. in the event of a move) Remove the reel compartment cover. Check the position of the fastening hooks. If necessary, move the fastening hook into an easily accessible position. CAUTION! There is a risk of injury from the reel.

  • Page 50: Removing The Belt In The Event Of Unit Failure

    18. Removing the belt in the event of unit failure In the event that the superrollo GW250 / GW255 unit Release the drive with the help of the supplied fails and the motor no longer runs, you can use the disengaging bracket.
  • Page 51 18. Removing the belt in the event of unit failure Maintain pressure on the disengaging bracket and pull the belt out of the superrollo GW250 / GW255 as far as possible. Storage bay Release the belt from the fastening hook and fully pull it out of the superrollo GW250 / GW255.

  • Page 52: What To Do If

    Check the power supply incl. connecting cable and plug. no functions? ... the superrollo GW250 / GW255 no longer reacts a) There may have been a power failure, see page 14. Reset the in the morning at the configured switching time? time and date with the help of the installation wizard, see page 32.
  • Page 53 The superrollo GW250 / GW255 is no longer ready for operation. properly either manually or automatically? Carry out a software reset in accordance with the instructions on page 47 and test the superrollo GW250 / GW255 using the default factory settings.

  • Page 54: Information About Maintenance And Care Of Your Equipment

    20. Information about maintenance and care of your equipment Maintenance Maintenance You can clean the superrollo GW250 / GW255 using CAUTION! a damp cloth. Please do not use aggressive or abrasive cleaning agents. A lack of maintenance can lead to personal injury through damage to your superrollo GW250 / GW255 and the roller shutter system.

  • Page 55: Tractive Force Diagram

    21. Tractive force diagram Belt length [ m ] Lifting weight [Kg] Belt thickness 1.0 mm Belt thickness 1.3 mm Belt thickness 1.5 mm Belt length [ m ] for superrollo GW250 Belt length [ m ] for superrollo GW255...

  • Page 56: Factory Settings

    22. Factory Settings Pos. Description Status / settings Automatic operation Switching times (opening / closing time) Opening times (Monday to Friday) 7 am Closing times (Monday to Friday) 8 pm Opening times (Saturday and Sunday) 8 am Closing times (Saturday and Sunday) 10 pm Automatic dusk function Twilight limit value...

  • Page 57: Ce Mark And Ec Declaration Of Conformity

    The electronic roller shutter belt winder superrol- The conformity has been verified and the corresponding declarations and documentation are available on file lo GW250 / GW255 (item No.: SR10250 / SR10255) at the manufacturer’s premises. complies with the requirements of the current European...

  • Page 58: Accessories

    24. Accessories Sunlight / darkness sensor ZB30 Item no. SR70030 In addition, you can equip the superrollo GW250 / GW255 with a sunlight / darkness sensor.

  • Page 59: Warranty Conditions

    All construction faults, material defects and presenting a copy of the bill. manufacturing defects shall be covered by the warranty. superrollo Hausautomatisierung GmbH will remedy any Your statutory warranty claims shall remain unaffected defects which occur within the warranty period free of by this warranty.
  • Page 60 Hausautomatisierung GmbH Gewerbepark 1 01156 Dresden (Germany) www.superrollo-online.de * 30 seconds free of charge, subsequently 14 cents / minute from German fixed line networks and Service Hotline: 01807 001-655* max. 42 cents / minute from German mobile networks.

This manual is also suitable for:

Gw255

Table of Contents