Cordless Operation; Oiling Instructions - BaByliss for MEN Super Clipper XTP Manual

Table of Contents

Advertisement

Cordless Operation

• Insert the adaptor into the base of the appliance, plug into a suitable
mains socket and switch on. The blue LED charging light will flash
when the adaptor is correctly inserted into the appliance and
connected to the mains.
• Once the appliance is fully charged the blue LED charging light will
stop flashing but remain on, unplug the adaptor from the mains.

Oiling Instructions

IMPORTANT! It is highly recommended before each use to oil the blades
with the oil provided. This ensures optimum cutting performance.
For the first use you will need to use the oil supplied with the product,
unscrew the cap and cut off the very end of the plastic tube with a pair
of scissors to release the oil.
To oil the blades ensure the unit is switched on. Gently squeeze the
oil tube and apply 2 drops of oil onto the blades. Leave the unit on for
a further few seconds to allow the oil to thoroughly spread the length
of the blades. Switch off the unit and remove any excess oil by gently
dabbing with a cloth.
To oil these
2 positions
To oil these
2 positions

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents