Sony WEGA KLV-30HR3 Operating Instructions Manual page 25

Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture,
c)
however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this:
While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered the "Set Up" menu
as it is explained on page 23 and after selecting the "Manual Programme" option, press OK . Then press
to select the AFT option and press
press OK twice to store.
Improve the sound for individual channels in the case of distortion in mono broadcasts. (Not available when
d)
"System" is set to "L".)
Sometimes a non standard broadcast signal can cause sound distortion or intermittent sound muting when
watching mono programmes. The Audio Filter option allows you to reduce this effect.
If you do not experience any sound distortion, we recommend that you leave the Audio Filter option set
to the default setting of "Off".
To do this:
Once you have entered the "Set Up" menu as it is explained on page 23 and after selecting the "Manual
Programme Preset" option, press OK . Next, press
v V
press or to select Off, Low or High.
You can not receive stereo or dual sound when "Low" or "High" is selected.
Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
e)
To do this:
Once you have entered the "Set Up" menu as it is explained on page 23 and after selecting the "Manual
Programme Preset" option, press OK . Next with the Programme option highlighted, press the PROG +/- button
to select the programme number you want to skip. When the programme you want to skip appears on the screen,
v V
press or to select the Skip option and press
confirm and store.
To cancel this function afterwards, select "Off" instead of "On" in the step above.
View and record scrambled channels (e.g. from a pay TV decoder) when using a decoder connected to Scart
f)
2/ 2 directly or through a VCR.
S
This option is only available depending on the country you have selected in the "Country" menu.
To do this:
Once you have entered the "Set Up" menu as it is explained on page 23 and after selecting the "Manual
Programme Preset" option, press OK . Next press
v V
or to select On. Finally press OK twice to confirm and store.
To cancel this function afterwards, select "Off" instead of "On" in the step above.
26
TV Functions
b v V
. Next press or to adjust the fine tuning between -15 and +15. Finally
v V
or to select the Audio Filter option and press
b
. Next press
v V
or to select the Decoder option and press
v V
or to select On. Finally press OK twice to
v V
or
b
. Next
b
. Next press