CALIBRATING ZERO ANGLE CONT'D
» With no Elevation dialed in your scope or held in
your reticle, shoot at your zero range target until you
can con dently con rm where your bullets point
of impact is relative to your point of aim. Enter the
vertical distance from your point of aim to your point
of impact. This can be done using either Mils, MOA,
inches or centimeters by changing units in the Kestrel.
Remember to be as accurate as possible. After
entering the Impact height at Target value and the
Zero Angle (ZA) value has been calculated, scroll to
Continue and press select.
» After accepting the new Zero Angle value the solver
will use this value to calculate Elevation and Windage
solutions. If you change altitude or if weather has
changed signi cantly from when you calculated
Zero Angle, the solver will automatically adjust your
solution for the new environment with no need to
re-measure Zero Angle.
16