Manual Programme Preset - Sony WEGA KLV-15SR3E Operating Instructions Manual

Colour tv
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Manual Programme Preset

28
GB
Option
Sound Offset
Before selecting "Label"/"AFT"/"Audio Filter"/"Skip"/"Decoder", press PROG +/– to
select the programme number with the channel. You cannot select a programme number that
is set to skip (page 29).
1
Press OK to select "Manual Programme Preset".
2
Press M/m to select one of the following options, then press OK.
Option
Programme
System
Channel
Label
Description
Changes the input sound level of the equipment connected to the
TV.
Press M/m to adjust the input sound level between –9 and
+9, then press OK.
Description
Presets programme channels manually.
1
Press M/m to select "Programme", then press OK.
2
Press M/m to select the programme number you want
to manually tune (if tuning a VCR, select channel 0),
then press <.
3
Press M/m to select "System", then press OK.
Note
Depending on the country/region selected for "Country"
(page 26), this option may not be available.
4
Press M/m to select one of the following TV broadcast
systems, then press <.
B/G: For western European countries/regions
D/K: For eastern European countries/regions
I: For the United Kingdom
L: For France
5
Press M/m to select "Channel", then press OK.
6
Press M/m to select "S" (for cable channels) or "C" (for
terrestrial channels), then press ,.
7
Tune the channels as follows:
If you do not know the channel number (frequency)
Press M/m to search for the next available channel. When a
channel has been found, the search will stop. To continue
searching, press M/m.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the
broadcast you want or your VCR channel number.
8
Press OK twice to store.
Repeat the procedure above to preset other channels manually.
Assigns a name of your choice, up to five letters or numbers, to the
selected channel. This name will be displayed briefly on the screen
when the channel is selected.
1
Follow steps 3 to 5 of "Programme Labels" (page 27).
2
Press OK.

Advertisement

Table of Contents
loading

Table of Contents