Nuovo
9 Packing, Transport, Storage
9.1 Packing
Check that specified components have been supplied. In case of missing parts, please contact customer service
without delay.
9.2 Transport
The EB EASY-PRINTER machine can be transported in any vehicle.
The machine should be transported upright.
To avoid damage to the machine use proper packing material and sturdy outer container.
9.3 Storage
The machine should be stored in a dry area at a moderate temperature.
After lengthy storage of the machine, all internal parts must be inspected for corrosion or other damage before
operation. Clean or replace defective or corroded components.
10 Disposal
At the end of its lifetime, the machine must be returned to Eggland's Best, Inc. or a designated agent.
11 General technical data
Egg-Stamper
Stamp head mounting
Quantity Stamp head holder
Stamp ink
Control
Print software
System
Control voltage USA
Control element
Machine dates
measurements in mm
(length x width x height)
Weight
Eggland's Best, Inc. Operating Standards Manual- EB Easy Printer Manual 16/001
Confidential. Do not reproduce without permission
Operating instructions for use
EB EASY-PRINTER
For 5 or 6 stamps produced
1
Food grade ink
Easy-Unit version 00.30 or higher
Microprocessor
1 x 110/230 V / 50/60HZ
Main switch, Single stroke button, Sealing cap approx. Switch, Safety-Guard
approx. Switch, approx. Index.
approximately 500 x 250 x 250 mm
approximately 16 kg
12
December 6, 2016