Table of Contents
Advertisement
Switch on the headset
Press the
volume up and volume down buttons
simultaneously.
You can hear the headset plays its pairing tone. The
LED indicator light blinks rapidly. Now, the headset is in
the discoverable mode (This mode is also referred to as
"pair-able" or "pairing" mode)
Make sure that your phone is switched on.
Enter your phone's Bluetooth menu and make sure that
the Bluetooth feature is activated (Please refer to your
phone's user guide).
Start to search for Bluetooth devices with your phone
(Please refer to your phone's user guide).
The phone searches for all Bluetooth devices within
about 10 meters and displays them as a list.
Select the VIM headset from the list.
Enter the passkey of 0000 to associate("pair") and
connect the phone to your headset.
Congraturations! The VSH411 Bluetooth
now ready to use with your mobile device.
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
®
headset is
III. Using the headset
Making a call
Make a call using your mobile phone.
The voice is transferred to the headset by pressing on
the talk button of your headset.
Redialing the last dialed number
While there is no active call, press the talk button briefly.
Voice Dialing
Check if your phone supports this function.
Voice tags must have been recorded in your phone.
When no call is in progress, press and hold the talk
button for about one second until you hear the second
beep (the first beep is played as soon as you press on
the talk button).
Your phone's voice dialing function will be activated. You
may hear some beeps which is played by your mobile
SEECODE DOC VER 20041229.0.93.AIDfduj7839fduTHDOCTHOIO - 876YUIF
Advertisement
Table of Contents
