Meter Display; More" Button Of The Setup Screen - CDI CD42 Instruction Manual

CD42 Pipeline Pig Location & Tracking System
Figure 40 Light Icon
Often, in outdoor daylight the backlight is unnecessary, and in fact it is usually impossible to even
tell if it is on. Because it can be difficult or impossible to tell if the backlight is on, there is a
Dashboard icon that indicates the backlight‟s current status at all times. The backlight is ON when
an icon that looks like that in Figure 41 is displayed. When the Light button is pressed, the
Dashboard icon will change immediately to reflect the new status.
Figure 41 Dashboard with light icon displayed

Meter Display

An analog-style signal strength meter is available for display on the main screen. This is in addition
to the normal waveform display, and will reside in the upper left-hand corner of the screen. The
Meter button (icon shown below in Figure 42) allows the operator to enable or disable the Meter
display option. The status of the Meter option will be displayed in the message area when the Meter
button is pressed.
Figure 42 Meter Icon

"More" Button of the Setup Screen

On the Setup screen there is one button labeled "More". This button icon is shown below in Figure
43.
Figure 43 More Icon
This icon indicates that there are more options available. When the operator presses this button on
the Setup screen, he is presented with more Setup options, shown in Figure 44.
Page 31