Automatic Record Mode - CDI CD42 Instruction Manual

The operator may have chosen to enter Location ID‟s as a numeric value. If this is the case a small
window displaying the Location ID will appear. Refer to Figure 22. Using the arrow keys in the
same manner as described above, enter a numeric value up to three digits long.
Note: The Location ID does not relate to Mile or Kilometer distances in any way. The numbers
are completely arbitrary and should be used in cases where the operator's pipeline does not
conform well to using Mile or Kilometer markers.

Automatic Record Mode

When the CD42 is in automatic mode and the operator presses the RECord button on the main
screen (Figure 23), the CD42 receiver unit will continuously monitor the incoming signals and
attempt to automatically detect, count, number and record pictures of transmitter passages without
an operator's presence. This feature is not available in any other system on the market.
CD42 Pipeline Pig Location & Tracking System
Figure 22 Numeric Location ID
Page 20