Table of Contents
Advertisement
Operating Instructions
05.
Uniprep 4 XL Rotary Scraping Tool
Specifications
Materials:
Finish:
Dimensions:
Depth of Cut:
Max Scrape Length:
Min - Max Pipe Size:
Weight:
Product Code:
This unit is design and manufactured to meet the requirements of
National Grid Gas Industry Standards GIS/PL2-5 Part 5 Electrofusion
ancillary tooling.
Caldervale Technology Ltd has a policy of continuous improvement
in product quality and design. Caldervale Technology Ltd therefore
reserves the right to change the specification of its models at any time,
without prior notice.
It is the responsibility of the operator to ensure that the PE pipe
is suitable for pipe preparation if in doubt contact the PE pipe
manufacturer for confirmation.
Mild Steel EN3A, Stainless Steel, Aluminum,
Brass and Tungsten Carbide
Natural / Zinc passivate to mild steel
Tool Only: L560 (22") x W175 (7") x
H225mm (9")
Tool Box: L590 (23¼") x W200 (8") x
H280mm (11")
0.3mm
355mm (14"), feed per rotation 4.5mm (1¾")
63mm (3") - 315mm (12") All SDR Ratings
4.8kg (10.6lbs) (Excluding tool box & chains)
13kg (28.7lbs) (Including tool box & chains)
01-05-010
05. Specifications
07
Advertisement
Table of Contents
