Related Manuals for Caldertech Uniprep 4 XL
Summary of Contents for Caldertech Uniprep 4 XL
-
Page 1: Operating Instructions
Uniprep 4 XL Rotary Scraping Tool Operating Instructions Product Code: 01-05-010 Revision: 02 Designed and Manufactured in the UK... - Page 2 Helping you make the right connections. © Copyright Caldervale Technology Ltd. The copyright for this product and instruction manual is held by Caldervale Technology Ltd. Any technical specifications, or illustrations part of this manual cannot be reproduced, used illicitly or distributed in any form for competitive purposes.
-
Page 3: Table Of Contents
Operating Instructions Uniprep 4 XL Rotary Scraping Tool Contents Contents Page Introduction 02. Safety Instructions 03. Operation 04. Removal After Completion 05. Specifications 06. Parts Diagram 07. Warranty Information 08. Certificate of Conformity 09. Service and Repair Decommissioning and Disposal... -
Page 4: Introduction
In accordance with Gas Industry Standards GIS/PL2-5 Part 5 Electrofusion ancillary tools. This product (Uniprep 4 XL) have been manufactured, inspected and tested in accordance with the ISO9001 quality control systems and procedures in place at Caldervale Technology Ltd, Dewsbury. -
Page 5: Safety Instructions
Operating Instructions Uniprep 4 XL Rotary Scraping Tool 02. Safety Instructions Safety Instructions Read and understand the whole instruction booklet before using the tool. 2. It is imperative that all possible precautions are made to avoid unexpected pipe movement when the tool is being used. -
Page 6: Operation
Operating Instructions Uniprep 4 XL Rotary Scraping Tool 03. Operation Operation Instructions for use Ensure that the pipe end is cut square (No more than 2° out of square), is free of burrs and the section to be prepared does not have any deep scores. - Page 7 Operating Instructions Uniprep 4 XL Rotary Scraping Tool 03. Operation 7. Attach the supplied chain firstly to the stationary chain anchor point (13) then at the adjustable chain anchor point (11) and tighten the adjustment handle (12) until firm against the pipe ensuring the chain is straight all the way around the pipe.
-
Page 8: Removal After Completion
Operating Instructions Uniprep 4 XL Rotary Scraping Tool 04. Removal After Completion Removal After Completion The scraped section should be inspected for areas of un-scraped pipe. If necessary, the pipe can be scraped again. 2. To remove the scraper, loosen the tool post locking screw (5) and raise the tool post clear of the pipe and retighten (5). -
Page 9: Specifications
Operating Instructions Uniprep 4 XL Rotary Scraping Tool 05. Specifications Specifications Materials: Mild Steel EN3A, Stainless Steel, Aluminum, Brass and Tungsten Carbide Finish: Natural / Zinc passivate to mild steel Dimensions: Tool Only: L560 (22”) x W175 (7”) x H225mm (9”) Tool Box: L590 (23¼”) x W200 (8”) x... -
Page 10: Parts Diagram
Operating Instructions Uniprep 4 XL Rotary Scraping Tool 06. Parts Diagram Parts Diagram Part Product Code Description Under Arm Clamping Screw Repair Kit Under Arm Slide Shaft Repair Kit 01-02-053 Handle Repair Kit Undercarriage Repair Kit... - Page 11 Operating Instructions Uniprep 4 XL Rotary Scraping Tool 06. Parts Diagram Part Product Code Description Axle Repair Kit 01-02-056 Tool-post Carriage Repair Kit 01-02-057 Quick Release Button Repair Kit 01-02-058 Cutting Tip & Holder Repair Kit Tool-post Carriage 01-02-060 Upper Body Repair Kit...
-
Page 12: Warranty Information
Operating Instructions Uniprep 4 XL Rotary Scraping Tool 07. Warranty Information Warranty Information 1. Extent of Warranty a) Subject to clauses 2 and 3, Caldervale Technology Ltd warrants to the end-user customer that its products will be free from defects in materials and workmanship, for six months after the date of purchase by the end-user customer, subject to providing proof of purchase. - Page 13 Operating Instructions Uniprep 4 XL Rotary Scraping Tool 07. Warranty Information iv) Operation outside the products specifications; v) Improper site preparation or maintenance; vi) Faulty pipes. 3. Limitations of Warranty a) Caldervale Technology Ltd does not warrant the operation of any product to be uninterrupted or error free.
-
Page 14: Certificate Of Conformity
Operating Instructions Uniprep 4 XL Rotary Scraping Tool 08. Certificate of Conformity Certificate of Conformity... -
Page 15: Service And Repair
Essential Environmental, Health and Safety Requirements. • If a Caldertech pipe preparation tool has reached the end of its useful working life and cannot be refurbished it must be sent to a licensed recycling facility for treatment. That will ensure the waste hierarchy requirements are met. - Page 16 INTERNATIONAL Caldervale Technology Ltd Bretfield Court, Dewsbury, West Yorkshire WF12 9BG, UK +44 (0)1924 469571 sales@caldertech.com caldertech.com AUSTRALIA / NZ Caldertech Australia Pty Ltd Unit 3/30 Juna Drive, Malaga WA 6090, Australia +61 (0)8 9209 1132 sales@caldertech.com.au caldertech.com.au...