Table of Contents
Advertisement
Available languages
Available languages
Screen Control menu
Screen Control
Auto Format:
On
Screen Format:
Smart
Screen Shift
Select:
Set:
Back:
OK
Auto Format
Automatically changes the screen format according to the broadcast signal.
1
2
Screen Format
For details about the screen format, see page 18.
1
2
Screen Shift
Adjusts the position of the picture for each screen format.
1
2
3
End:
MENU
Press OK to select "Auto Format".
Press M/m to select "On", then press OK.
To keep your setting, select "Off".
Tips
• Even if you have selected "On" or "Off" in "Auto Format", you can always modify the format of
the screen by pressing
• "Auto Format" is available for PAL and SECAM signals only.
Press OK to select "Screen Format".
Press M/m to select "Smart", "4:3", "14:9", "Zoom" or "Wide" (see
page 18 for details), then press OK.
Press OK to select "Screen Shift".
Press M/m to select one of the following, then press OK.
V Shift: Adjusts the vertical picture position.
H Shift: Adjusts the horizontal picture position.
Reset: Resets to the factory settings. Instead of step 3, press M/m to select "OK", then
press OK.
Press M/m (for vertical picture position) or </,(for horizontal picture
position), then press OK.
Tip
When "Screen Format" is set to "4:3" or "Wide", "V Shift" cannot be adjusted.
You can select the options listed below on the Screen
Control menu. To select options, see "Navigating
through menus" (page 19).
repeatedly.
25
GB
Advertisement
Chapters
Table of Contents
