4: Preventing The Tv From Toppling Over - Sony BRAVIA KLV-W40A10E Operating Instructions Manual

1
Connect your aerial with the supplied
coaxial cable.
If connecting to an aerial only (A)
Connect your aerial to the
the TV, then go to step 3.
If connecting to a VCR with an aerial (B)
Connect your aerial to the input socket on your
VCR.
2
Connect your VCR.
1 Connect the output socket on your VCR to the
socket on the rear of the TV with the RF
lead.
2 Connect the scart socket on your VCR to the
/ 2 scart socket on the rear of the TV
with a scart lead.
3
Connect the supplied mains lead to the AC
IN socket on the rear of the TV.
Note
Do not connect the mains lead to your mains socket until
all connections are complete.
4
Bundle the cable.
2
1 Run the mains lead through the bundling band
and attach to the right of the rear panel with
the supplied screw.
2 Remove the screw to open one side of the
cable cover and run the cables through, then
tighten the screw again.
12
GB
socket on the rear of
1
4: Preventing the TV
from toppling over
For additional stability, the anchor attachments on the
back of the TV can be used to secure the TV to a wall.
(Do not remove the anchor attachments).
1
Run suitable cables through the holes of
both anchor attachments on the back of the
TV.
cable (not supplied)
2
Anchor the cables to a stable surface such
as a wall or pillar.
anchor attachment
(with hole)
wall anchor bracket
(not supplied)