Sony BRAVIA KDL-70XBR3 Operating Instructions Manual page 47

Option
Others
Description
Auto Adjustment Select to automatically adjust the display position, Phase and Pitch
of the picture when the TV receives an input signal from the
connected PC. Note that Auto Adjustment may not work well with
certain input signals. In such cases, manually adjust the options
below.
Reset Resets the current settings to the default value.
Phase Adjust after Pitch to fine tune overall sharpness.
Pitch
Adjust uneven sharpness on screen.
✍
Horizontal Center Allows you to move the position of the picture left and right.
Press B/b and press
Vertical Center Allows you to move the position of the picture up and down.
Press B/b and press
Wide Mode Normal
Full 1
Full 2
On
Power
Management
Off
✍
For the PC Input Signal Reference Chart, see page 51.
to adjust.
to adjust.
Select to display in the original image size.
Select to enlarge the picture to fill the display area,
keeping its original aspect ratio.
Select to enlarge the picture to fill the display area.
Select to automatically switch to the standby
mode when there is no signal input for 30 seconds.
Select to turn off Power Management.
Power Management is not VESA-compliant.
Using the Menus
47