Setting Up The Channel List - Initial Setup - Sony BRAVIA KDL-70XBR3 Operating Instructions Manual

Setting Up the Channel List – Initial Setup
After you finish connecting the TV, you can run the Initial Setup to create a
list of available analog and digital channels. The Initial Setup screen
appears when you turn on the TV for the first time after hooking it up.
1
Press to turn on the TV.
The Initial Setup screen appears.
2
Press V/v to highlight the on-screen
display language. Then press
message "Start auto program now?"
appears.
3
Press V/v to highlight "Yes" then press
Auto Program performed through Initial Setup will automatically
create a list of receivable channels from both VHF/UHF antenna and
cable TV channels if both sources are connected.
✍
If you select "No" during Initial Setup, the Initial Setup screen will
reappear each time you turn on the TV until you complete Auto
Program.
To run Auto Program again at a later time
Use the Auto Program feature, see page 39.
Getting Started
. The
.
19