Sony Bravia KDL-46X2000 Operating Instructions Manual page 5

2: Attaching the stand
(only for KDL-40X2000)
1
Place the TV onto the stand by aligning the
screw hole alignment lines over the stand
as shown.
2
Fix the TV to the stand using the supplied
screws.
Notes
• This TV is very heavy, so two or more people should place
the TV on the stand.
• If using an electric drill, set the tightening torque at
approximately 1.5 N·m (15 Kgf·cm).
1
2
2
3: Connecting an aerial/
VCR
Connecting an aerial only
Mains lead (supplied)
Connecting an aerial and VCR
Mains lead
(supplied)
Scart lead (not supplied)
Coaxial cable
(not supplied)
VCR
Coaxial cable
(supplied)
Coaxial cable
(supplied)
5
GB