Viewing Individual Zones; Viewing The Security Event History - Control 4 Smart Home OS 3 Security Manual

Viewing individual zones

The main Security menu shows you the state of your security system as a
whole, but you can keep an eye on individual security zones, too
To view security zones:
1 From the Security menu, select the Zones icon near the top of the screen
The Zones screen opens In this screen, you can view the status of each
security zone in your house If a device is controllable by the Control4
system (such as a front gate), you can control it from here
2 To view only "open" zones (zones that have detected something), select
the three-dot options menu, then select Open Zones

Viewing the security event history

Your Control4 system records each security event, including alarms, sensor
detections, and arming and disarmings
5
To view security event history, the History agent must be included in your
home automation project Ask your installer for details
To view the security history:
1 From the Security menu, select the History icon near the top of the screen
The event history opens
2 To filter the results, select (or deselect) any of these icons in the upper-
right corner of the screen:
Info—Zone openings, closings, Warnings—Emergency alerts and
and state changes failures of armings and disarmings
Critical—Alarm triggerings and
clearings