Disarming Your System; Sending An Emergency Alert - Control 4 Smart Home OS 3 Security Manual

Disarming your system

To disarm your system:
1 Upon entry to your home, an Entry Delay timer begins counting down if
your security system has been triggered, or the Press to DISARM button
remains if the security system has not yet been activated
2 Select the red Cancel or Press to DISARM button in the middle of the
screen A security keypad opens so you can enter your security PIN
3 Enter your security PIN, then select Done
4

Sending an emergency alert

You can send a manual fire, police, or panic alert from any Navigator, even
while the security system is disarmed (Availability and method of sending the
alerts depends on your security system provider )
To send an emergency alert:
1 From any Navigator's Security menu, select the Emergency icon
A list of emergency alert options opens
2 Select one of the alerts, then select Yes at the confirmation message
3 To cancel the alert, select the Press to DISMISS button
Important: Canceling the alert will not recall emergency services that
have already been dispatched to your home