Using the Security menu
Whatever security system your home uses, Control4 gives you an easy-to-use
interface for arming, disarming, and controlling it You can send a panic alert,
view the history of all logged security events, and even directly control security
sensors
Accessing the Security menu
To access the Security menu:
1 On a Navigator's home screen, select Security, then Security System
The Security menu opens
3
Arming your system
To arm your system:
1 Select the green Press to ARM button in the middle of the screen
2 In the Arming Mode list, select Home or Away The button changes to
red, and you are given a countdown to exit the building before the alarm
system is armed
Tip: To change the length of time delay, or to require a PIN code be
entered for arming, ask your Control4 Dealer
3 To cancel the countdown timer and disarm the system, select the Cancel
button